Failed Salt Water Chlorinator Cell prompted me to document the circuit in my M140 chlorinator. Pretty simple…
I was able to rig up a test for the power supply using a couple of #44 bulbs and a resistor.
Yup, working fine. Interestingly: the failure mode for the old cell is that it appears to have a “diode” like short between the center plate and the sense pin. I can only speculate that the calcium build up has caused this to act as a “diode”?
SRC is S2065J
Diodes are: 1N5404
This unit can pack out 18AMPS. (Rated at 14A)